posted
I previously switched from a Pioneer PD-V10G player to a RSQ MV333 player. The Pioneer had a special Pioneer adapter to convert the video signal to coax. My question is what do I need to convert the video to coax with the RSQ. The guy at Radio Shack sold me (I think is) a game switcher. I believe i need an rf modulator of some sort. So, how do I send the signal in the yellow plug to a signal I can run on coax. I've got the bars 4 tvs wired through a splitter. Many thanks in advance! Chuck
Posts: 650 | From: Massillon, Ohio USA | Registered: Jan 2001
| IP: Logged |
posted
You'll need the following, an"RF" converter and an "RCA" to coax plug.
What I did is run the "RCA" plug out of the back of the player to the "RF" converter and then from that to my coax going to the various T.V.'s in the bar. The only time, (Ithink) you'd need a game switcher or what I think in your case is an "A/B" switch would be if you are running multiple sources into your "RF" converter.
Anyone with other ideas please feel free to chime in.
posted
Thanks alot, I was sure I was sold the wrong thing. Headed back there today. Many thanks again. Chuck
Posts: 650 | From: Massillon, Ohio USA | Registered: Jan 2001
| IP: Logged |
posted
Thanks again, Flame and Knight. I've got it running now. I greatly appreciate your assistance. I noticed on the back of the Pioneer adapter it says 'rf modulator' on it. It had 3 prongs that plugged directly into the back with a coax output. The one I got from Radio Shack required 110v. Thanks again. Chuck
Posts: 650 | From: Massillon, Ohio USA | Registered: Jan 2001
| IP: Logged |
UBBFriend: Email this page to someone!
Printer-friendly view of this topic
